UHP400 graphite electrode with nipple

Operating instruction
1. Use special hoist tools to hoist graphite electrode. It is strictly forbad to prize electrode ends up with crowbar. It must be handled with great care during transport to avoid being struck.
2. Graphite electrode must be kept away from being moistened or wetted by rain, snow and water, and must be kept dry.
3. Carefully checking before making connection, make sure that socket and nipple thread is not damaged, nipple pitch plug is in.
4. Blow the nipple and socket threads with compressed air.
5. It must be dried in the furnace before use, the drying temperature in the furnace should be less than 150℃,the  drying period should be more 30 hours
6. Graphite electrode must be connected and contacted closely and straightly.Use moment spanner for connecting electrode with suitable force. Mustn’t decline.
7. The holding device must hold the electrode tightly, good contact and no arc.
8. To avoid the electrode breakage, put the large materials in lower part and small materials in the upper part. Insulating materials should not be put into the furnace. The working current of electrode must be conformity with the allowable current of electrode in the instructions.

Company Information

Established in 2011, Zibo Ouzheng Carbon Co.,Ltd is a manufacturer and trader specialized in the research, development and production of graphite products. We are located in city Zibo province Shandong, with convenient transportation access. The main products: graphite electrode, graphite block, graphite rod, graphite plates, graphite crucible, graphite mold,graphite bearing and so on. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.